Nut Drivers
Special tool required to remove or secure micrometer heads.
• Special nuts are used for fastening micrometers on some manual stages (TSD and TSDS series). This custom nut driver makes removing and attaching these nuts easier and faster.
• This product comes as a set of two head sizes. Refer to the following table for compatible stages.
Head Size[mm] | Part Number of Compatible Products |
For φ8 | MDC-6.5/6.5R |
For φ12.5 | TSD-40*/TSD-60/65/80、TADC-40/60、TSDH-40/60 |
For φ14.5 | TSD-100/120 |
* TSD-40 C type only.• Not all manual stages (TSD and TSDS series) are compatible. Contact our Sales Division if you have any questions.
• Micrometer heads can be swapped with a finepitch screw upon request. Note self installation may not be covered by the warranty of the stage's warranty.