This product replaces part code LHM150A-E03T3-kits
- 25, 50, 100, 150, 200 mm travel
- Up to 65 mm/s speed; 25 N peak thrust
- 3 kg load capacity
- 50 N⋅cm cantilever load
- Encoder position feedback with slip/stall detection and automatic recovery
- Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
- With Auto Detect, the X-MCC controller configures its settings automatically for the connected peripheral
1. Built-in motor encoder allows for easy slip/stall detection and recovery.
2. Panel Mount DB15 with Auto Detect allows the stage to be easily connected to an X-MCC series controller and ready to use without additional user input.
3. Only 23 mm high and designed to fit in low profile applications.
4. 200 step per revolution stepper motor with 200 CPR motor encoder.
5. Mount to the stage top using 4 x M3 threaded holes.
6. LHM-E stages are available in a variety of travel lengths.
7. LHM-E stages can be assembled in XY or XYZ configuration without additional hardware.
Zaber Technologies' LHM-E Series devices are encoder-equipped motorized linear stages with a compact size and affordable price tag. The stages are designed to connect directly to our X-MCC Series universal motor controllers, or they can be used with any 2-phase stepper motor controller through the panel mount DB15 connector. Set up is easy with Auto Detect. Once connected, the X-MCC controller will automatically detect and configure the LHM-E.
At only 23 mm high, these miniature plain bearing stages are excellent for applications where a small profile is required. Carriage pre-load can be easily adjusted to compensate for wear over the lifetime of the stage.